Run resilient networks on a living map of every asset
For electricity, gas, water, and renewables operators, Airfree unifies network models, field work, and earth observation so you can cut outage minutes, manage risk, and invest where the network needs it most.
Generation to the meter, mapped end to end
Every capability is built on enterprise-grade spatial infrastructure — engineered for the scale, safety obligations, and reliability pressure of critical-infrastructure operators.
Network & Grid Asset Management
Model electricity, gas, and water networks as a connected spatial graph — poles, cables, mains, valves, and substations — with full attribute history and condition state.
Outage Detection & Response
Correlate sensor, SCADA, and crew data against the network map to locate faults faster, scope affected customers, and direct restoration where it matters most.
Vegetation Encroachment
Earth-observation change detection flags vegetation growing into transmission and distribution corridors before it becomes a reliability or bushfire risk.
Transmission & Pipeline Corridors
Plan, map, and monitor linear infrastructure across hundreds of kilometres — easements, clearances, ground movement, and third-party encroachment in one view.
Renewables Siting
Rank candidate solar, wind, and storage sites against irradiance, wind resource, slope, grid proximity, and land constraints using fused spatial layers.
Field Crew Enablement
Give crews the live network map, work orders, and asset detail on any device — with offline sync for remote spans and real-time position back to the control room.
Load & Demand Mapping
Visualise consumption, DER uptake, and constraint hotspots across the network to target reinforcement, phase balancing, and capacity investment.
Network Digital Twins
Maintain a continuously updated twin of the physical network on Airfree Geospatial — the trusted basis for planning, simulation, and regulatory reporting.
Earth observation for network resilience
Airfree operates a full pipeline from raw satellite and airborne archives to analysis-ready layers — so corridor risk, vegetation growth, and ground movement are monitored continuously, not just on the inspection cycle.
Earth observation platformCorridor Change Detection
Multi-temporal satellite analysis across transmission and pipeline corridors highlights vegetation, erosion, and encroachment between field inspections.
Bushfire & Hazard Exposure
Overlay fuel load, terrain, and historical fire data against the network to prioritise hardening, inspection, and vegetation programs where exposure is highest.
Ground Movement & Leak Signals
InSAR-ready pipelines and thermal imagery help surface subsidence, ground deformation, and anomalies along buried assets and water mains.
Renewables Resource Layers
Analysis-ready irradiance, wind, and land-cover layers feed siting and yield models for utility-scale generation and storage.
Built for the network operator
Designed for planning and control teams who carry reliability and safety obligations — intelligence that drives investment and response, not another map to maintain by hand.
Reliability & Risk Alerts
Threshold-based alerts fire when encroachment, ground movement, or asset condition crosses a defined limit — routed to planners and crews via API, webhook, or dashboard.
Investment & Reinforcement Analytics
Spatial analysis of load, condition, and risk helps target capital where it reduces the most outage minutes and defers the most cost across the network.
Regulatory & Audit Reporting
Automated spatial reports on inspections, clearances, and network state, formatted for reliability standards, safety regulators, and investment submissions.
Interoperable with your network and operational systems
Airfree is designed as an open spatial layer. Its REST and OGC-compliant APIs are built to connect to the GIS, SCADA, and asset-management systems that run critical infrastructure — without forcing a rip-and-replace.
All capabilities are available via REST and OGC-compliant APIs, so the network model and its risk layers flow into planning, operations, and compliance systems directly.
- — OGC WMS / WFS / WMTS / API-Features endpoints
- — GeoJSON, Shapefile, GeoPackage export
- — Webhook delivery for risk and condition events
- — Raster and point-cloud ingest for corridor surveys
- — REST API with OpenAPI 3.1 specification
One connected platform, four product lines
Utilities need more than a map — they need network modelling, field mapping, and the compute to process observation data, all sharing one origin and one source of truth.
Airfree Geospatial
Network modelling, asset management, and continuously updated digital twins of electricity, gas, and water infrastructure.
Learn moreAirfree Maps
Crew routing, corridor navigation, and the same-origin map surface that renders the live network in the field and the control room.
Learn moreAirfree Cloud
The compute backbone that processes earth-observation archives and serves network analytics at utility scale.
Learn moreBuild a more resilient network
Whether you operate a distribution network, a transmission backbone, or a renewables portfolio, our team will scope a spatial solution matched to your assets, your risk, and your reliability obligations.
Talk to our utilities team